Individual Conductive Rod Electrodes / Levelsensor
The conductive sensors from Reed Electronics AG can be produced and adapted in line with customer requirements. The standard design can detect up to five switching points. The electrodes are cut to length and installed as per the customer’s needs.
The sensors with discreet switchpoints are used to detect limit levels. In this process, conductometry is used to detect whether there is any contact with the medium. Multiple electrodes can be installed and thus multiple limit levels can be detected with one sensor.
- Customer-specific production with no minimum order quantities
- Wide range of materials
- No moving parts
- Suitable for highly viscous media
- Customer-specific electrical and mechanical connections
- Reliable
- Free from wear and tear and no maintenance required
- Simple installation
TECHNICAL SPECIFICATIONS
-
Mechanical connections
G1/4", G3/8", G1/2", G1", G1,5", G2", flange
(optional incl. counter nut) -
Mechanical materials
PVC, PP and PVDF
-
Electrode dimensions
Ø 5 mm
-
Electrode length
1–2,000 mm
(additional lengths upon request) -
Installation type
From the outside
-
Number of switchpoints
1–5 switchpoints (optional: tank as the ground)
-
Electrical connections
Socket, plug-in connector or as per a specific customer request
-
Socket materials
Aluminium and polyamide
-
Cable materials on the output side
PVC, PUR, silicone, Teflon, FEP or as per a specific customer request
-
Medium requirements
Medium must be conductive
-
Temperature range
-20°C to 140°C
(dependent on the materials) -
Pressure range
Must not be used as a safety-relevant limiting device within the pressure range.
-
Protection class
Up to IP68
-
Assembly
Can be installed in assemblies
-
Note
No integrated control unit